Correcting the color and shape of the teeth depends on several factors, from the color of the teeth to the shortness and length and even the way the teeth are placed on top of each other to form a beautiful tooth; In fact, when all the items are placed together, they create a wonderful beauty for a beautiful smile.

Using dental laminate or composite veneer

Using a restorative method for Correcting the shape of teeth By using tooth-colored restorative materials or composite veneers, you can add materials of the same color to the broken or worn part and restore the shape of the tooth.

The method of dental lamination or veneer is considered the best method of correcting the shape and form of teeth.

One of the advantages of using dental laminates or veneers is being conservative and preserving the remaining dental tissue as much as possible, and another advantage is their extraordinary beauty; These methods are considered permanent and long-term treatments.

Dental cover to correct the shape and form of teeth

If the dental defects and fractures are very extensive, it is necessary to correct the shape and size of the teeth or adjust the size of the teeth by means of veneers. Veneers are a cost-effective and conservative approach to improving smile design and having a more beautiful smile. Beautifying and aligning teeth is one of the cosmetic dental treatments that make subtle and small changes in the teeth. But these small changes make a significant difference.

Correcting the shape and size of the teeth is one of the easiest ways to correct the fullness of the lips, the lack of one hand, or partial misalignment of the teeth, which puts a more attractive smile on the lips. Teeth beautification brings a higher self-confidence to the patient due to correcting the significant unevenness of the teeth and aligning the teeth with one hand. Aligning teeth using ceramic and composite laminates is less expensive and shorter compared to orthodontic methods.

Correction of tooth form

Correcting the shape and size of the tooth or scaling the tooth is one of the cosmetic dentistry methods in which a small amount of tooth enamel, i.e. the outer layer covering the tooth, is shaved to correct the shape, length or surface of one or more teeth. Sometimes it is enough to cut a few millimeters of the tooth in the right place to make the tooth much more beautiful. Correcting the shape and size of teeth is often done along with bonding. Bonding is another cosmetic dentistry method in which the shape of the tooth is corrected using composite materials of the same color as the tooth.

Problems that can be corrected by the method of measuring the teeth

Defects or problems such as partial overlapping or abnormal shape of the teeth, fullness or partial fracture of the lips or excessively sharp canine teeth can often be solved by partial tooth grinding in order to correct the shape and size of the teeth.

Advantages

Although beautification teeth is a maintenance method to change the appearance of the teeth, it is better to check the strengths and weaknesses of this method before making a decision to make sure it is suitable. The benefits of correcting the shape and size of the teeth are as follows:

Lower cost

Cosmetic shaving is an inexpensive way to have a more attractive smile. The cost of this method is usually determined according to each tooth and according to the extent of the treatment. If the tooth defect is the result of an injury or an accident, the insurance will pay part of the cost.

No pain

Because only the surface enamel of a beautiful tooth is given, the patient does not feel any discomfort or pain during the treatment and there is no need for anesthesia.

Improve teeth health

Fixing minor overlaps of teeth and other defects that can be the place of accumulation of mass and plaque, reduces the possibility of tooth decay and gum disease.

Alternate orthodontics

Correcting the shape and size of the teeth can sometimes be an alternative to orthodontics, because with this simple method, the teeth can be made more orderly and their overlap and irregularity can be removed.

The ideal candidate for treatment

Correcting the shape and size of the teeth is the best method for people who want to make only minor changes in their teeth or their teeth need a brief restoration. This method is recommended for patients whose teeth are slightly crooked and irregular or too pointed or one side of the tooth protrudes more than the other. Of course, teeth whitening is not suitable for decayed teeth, denervated teeth or unhealthy gums.

Stages of treatment

Correction of tooth shape is done using special dental tools and abrasion techniques. The dentist carefully cuts the tooth enamel with a laser or a drill. Before starting the treatment, photos are taken of the teeth to check the location and amount of pulp and to ensure that the teeth are healthy. Then the dentist marks the areas that need to be sharpened and beautified with a pencil. In the next step, the dentist trims the malformed areas, shortens the tooth to match the rest of the teeth, and corrects the problems related to the misalignment of the teeth. The dentist removes or minimizes the surface defects of the teeth with a special polishing device and sometimes smooths the edges of the teeth with sandpaper-like strips. Finally, the dentist straightens and polishes the teeth. Correcting the shape and size of the teeth sometimes only requires a 30-minute session, although the duration of the treatment depends on its extent.

If tooth shape correction is done along with bonding, the dentist can correct lip filling and distance between teeth, making the tooth more beautiful and its color better. Because this causes tooth sensitivity, the dentist may numb the tooth. The dentist sometimes applies special preparation liquid to the tooth to strengthen the bond between the resin and the tooth. The dentist shapes the resin and finally cures it with light. If the beautification of more than one tooth is desired, the patient will be given several sessions.

Limitations

The limitations of modifying the shape and size of the teeth are as follows:

Minority of change

Correcting the shape and size of the teeth, unlike some cosmetic dentistry methods, does not make a significant change in the smile and does not make the teeth whiter. Therefore, if you want a general change and a significant modification of the smile design, it is better to try veneers. Cosmetic dentistry only fixes small defects, while veneers cover the entire front surface of the tooth and turn the tooth completely from one side to the other.

increasing the possibility of tooth decay

According to the amount of enamel that has been shaved off during tooth shaping, the tooth may become sensitive after a while.

Care after treatment

After correcting the shape and bonding of the tooth, it should be well taken care of in order to maintain the obtained result. Bonded teeth are more at risk of lip filling or fracture and staining or yellowing than all dental restorations. Nail biting, pencil head biting, eating solid foods and opening bottle caps with teeth are prohibited for patients who have undergone this treatment. By following these precautions, the risk of tooth filling can be reduced. Teeth should be brushed twice a day to keep teeth white and stain-free. Cigarettes, coffee and tea are also substances that stain the resin, so patients are advised to reduce the consumption of these drinks and quit smoking.

Dandan used, of course, today with the introduction of all-ceramic veneers, one can be sure of the beauty and transparency of these veneers.

Regulating teeth with orthodontics

Orthodontics is considered a common method of correcting the shape and form of teeth, which honestly guarantees your interests.

This treatment is more suitable for people who have crooked teeth and even jaw problems

For example, orthodontics is used to fix the gap between the teeth, which can make the teeth look good.

Gum surgery to increase the length of teeth

In order to make the teeth look longer, it is not necessary to use dental composite and it can be done faster with gum surgery in one session. This method is more suitable for those who have short teeth and their gums have the potential to beautify the teeth by removing the extra gum. The easiest way to know is to look carefully in front of the mirror and see if the gums are too visible when you laugh, if so, then you have a smile problem. You have a gummy smile.

Correcting the shape and form of the teeth depends on several factors, from the color of the teeth to the shortness and length and even the way the teeth are placed on top of each other to form a beautiful tooth; In fact, when all the items are placed together, they create a wonderful beauty for a beautiful smile.